Talking about the precautions of handheld ultrasonic spot welding machine
Handheld ultrasonic spot welding machine: It belongs to a small ultrasonic plastic spot welding equipment, also known as ultrasonic plastic spot welding machine, ultrasonic spot welding machine, etc. This machine is suitable for various products: spot welding, riveting, riveting Point, welding, welding and other processes.
Note for handheld ultrasonic spot welding machine:
1. The ultrasonic handle has a life of more than one year under normal use.
2. In case of poor contact during use, stop immediately to avoid damage to the piezoelectric ceramics.
3. The ultrasonic spot welder works intermittently. It is forbidden to press and hold the switch or short-circuit the switch to cause the ultrasonic transducer to not work intermittently, causing the temperature of the transducer to rise. If the temperature exceeds 60 degrees (transducer temperature), stop using it immediately, etc. Use it after cooling down, and add air-cooling to force cooling if necessary.
4. Before use, check whether the ultrasonic welding head is loose or broken, otherwise the ultrasonic power supply and ultrasonic transducer will be damaged.
5. Avoid getting damp at the connection of the ceramic chip of the ultrasonic handle. When the ultrasonic transducer is forcibly cooled by compressed air, it is forbidden to use unfiltered gas
6. Be sure to use the original ultrasonic welding head, frequency matching is very important, the offset frequency of the ultrasonic welding head will cause the ultrasonic power supply and transducer to be damaged.
7. Be sure to use a stable voltage power supply. (If necessary, install a voltage stabilizer before the ultrasonic power supply). Unstable power input can cause damage to the ultrasonic power supply and break the ultrasonic transducer.
Hand-held ultrasonic spot welding machine precautions: Ultrasonic handle is one of the main components of ultrasonic spot welding machine. In order to prolong the service life of ultrasonic handle, read and understand the manual before use to avoid unnecessary loss caused by improper use.
