What is the difference between an ultrasonic cutting machine and an ordinary cutting machine?
Traditional cutting uses a knife with a sharp edge to press against the material to be cut. The pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear strength of the material to be cut, and the molecular bonds of the material are pulled apart and cut. Since the material is pulled apart by strong pressure and rigidity, the cutting tool's edge should be very sharp, and the material itself has to bear relatively large pressure. The cutting effect is not good for soft and elastic materials, and it is more difficult for sticky materials.
Ultrasonic cutting machine uses ultrasonic energy to heat and melt a part of the material to be cut, so as to achieve the purpose of cutting the material. Ultrasonic cutting machine is a device that uses wave energy for cutting processing.
Ultrasonic cutting machine does not require a lot of pressure and will not damage the cutting material. The cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. It has obvious cutting effect on frozen, viscous and elastic materials. It is especially effective for cutting food, rubber or objects that are inconvenient to apply pressure. At the same time of cutting, the cutting part has fusion.
The ultrasonic cutting machine uses high-frequency wave vibration to quickly process food, eliminates the downtime caused by the continuous cleaning of traditional cutting blades, and greatly improves the efficiency, and the equipment provides a new process for cutting, slicing, and automatic steering processing Food makes the production process flow, low maintenance cost, non-stick knives, and environmental protection.
QG-400T ultrasonic cutting machine product features:
1. Compact design, large amplitude, energy is concentrated to the cutting part, and small pressure;
2. Fast cutting speed, good edge banding effect, no burrs and deformation;
3. Knife edge abrasive steel SK51 material, good thermoplasticity, high cutting precision, good cutting surface finish;
4. The blade can be replaced, reducing costs;
5. There are various types of cutting knives, and cutting knives with relevant shapes can also be customized according to customer processes.
