Ultrasonic transducer mold material requirements
The function of the ultrasonic transducer is to convert the input electrical power into mechanical power (ultrasound) and then transmit it out, while consuming a small part of the power by itself. For the ultrasonic transducer, the technical problem to be solved is to design an ultrasonic transducer with a large working distance and a wide frequency band. Ultrasonic transducers are widely used. According to the application industries, they are divided into industry, agriculture, transportation, life, medical treatment and military. According to the realized functions, it is divided into ultrasonic processing, ultrasonic cleaning, ultrasonic detection, detection, monitoring, telemetry, remote control, etc.; according to the working environment, it is divided into liquid, gas, biological body, etc.; according to the nature, it is divided into power ultrasonic, detection ultrasonic, ultrasonic imaging, etc. .
General requirements for ultrasonic transducers
1. Low calorific value.
2. Good thermal stability.
3. Strong consistency between frequency and static capacitance.
4. Low resonant impedance.
5. Long average life span.
6. It can be used in various ultrasonic cleaning equipment
Common problems of ultrasonic transducers
There are problems with chip cracking, weakness, easy overload, electrode sparking, electrode cracking, severe heating, strange noise, wave leakage, and chip misalignment. We believe that the reasons can be classified into three categories.
1. There is a problem with the customer's drive power supply or mold and assembly
2. There is a problem with the transducer and the horn
3. There is no problem with the products of both parties, but they do not match.
For one situation, we recommend that customers actively find the cause, or communicate with our company’s technical staff, and improve it as soon as possible. Even if you do not use our company's products, it is definitely beneficial and harmless to improve your own problems.
The second situation is bound to happen, but the possibility of discovery is very small.
The third situation is common, that is, the customer's drive power is good, the transducer is also good, and the assembly is normal, but the parts do not match. The main parameters that cause the mismatch are the frequency and capacitance of the transducer.
The use environment of ultrasonic transducer
The energy device generates heat when it is used, which is mainly caused by three reasons.
One is that the workpiece to be welded will heat up or the material processed by ultrasonic will heat up, or the mold (tool head) and the horn will heat up for a long time, and these heat will be transferred to the transducer.
The second is the power loss of the transducer itself. Since 100% energy conversion efficiency cannot be achieved, the part of the energy lost must be converted into heat. The temperature rise will cause the parameter of the transducer to change, and the matching state will gradually shift. What is more serious is that the temperature rise will cause the deterioration of the performance of the piezoelectric ceramic wafer. This in turn makes the transducer work worse and heat up faster, which is a vicious circle.





