一. Performance characteristics of mask machine:
1. The ventilator and equipment of the present invention can produce 1-4 layers of non-woven close-fit ventilator. The thickness of the mask can be adjusted within a certain range, and the length of the nose line can be adjusted arbitrarily. Can produce single and double nose line respirators. The rubber band of the packing line is placed inside the conveyor box. The rubber bands at both ends of the mask are automatically conveyed and cut. Welded firmly. Point-and-finish equipment for one time, high output, low reject rate and easy operation. The appearance is an aluminum alloy structure.
2. All aluminum profile machine is clean and beautiful, no welding, no paint. Man-machine interface touch screen control, built-in time, total output, same-day output, set automatic alarm and shutdown times, numeric keys to adjust film speed
3. The output of the mask comes from the conveyor belt, the speed is adjustable, the output is neat, the product quality is stable, the operation is convenient, and the production efficiency is high.
4. The mask adopts ultrasonic welding with superior performance, high-speed chipping, spot welding, and strapping.
二．Maintenance of mask machine:
1. Check the tension of each unwinder in time to meet production needs.
2. The main parts of the machine and equipment of the mask should be checked regularly, such as cutting off the working state of the bearing to be cut by wamata, and properly lubricating to ensure its normal work.
3, the pressure of the cutter is appropriate, otherwise it is easy to cause cutting and so on.
4. Regularly check the welding wear, adjust the pressure appropriately, and keep the pressure to the minimum under the premise of ensuring welding.
三．The mask equipment and precautions:
1. Properly adjust the pressure of each component (such as welding and cutting) to reduce the load of the whole machine.
2. When opening the mask machine and the host of the equipment, the raw materials should be manually drawn into the welding mold to make it normal production.
3. All bearings should be checked regularly to ensure normal operation.
4. Before starting the mask machine, the ultrasonic welding machine should be turned on first, so as not to damage the ultrasonic welding machine under excessive load.
