How to set the parameters of ultrasonic sewing machine roller?
Today, we bring you the video of how to set the parameters of ultrasonic sewing machine roller? Let's go!
(After turning on the ultrasonic power)
At this time you look at its display screen is not bright
And then whether to go to one of its language selection screens
There are two language modes in Chinese and English
Then on our side,
To make it easier for us to understand, choose the Chinese mode
good
After the selection of this side into a main interface
And then?
If you say you want to adjust some specific
The speed of the rollers
Here to enter a parameter setting interface
You see that?
There's a parameter setting system here.
Access to the system
Good choice of language.
Parameter monitoring
Parameter monitoring
OK
This is a parameter setting interface.
So if we say we need to debug
If you weld this product,
We'll just keep the interface still.
Then we start adjusting the parameters.
Does this sewing machine need tuning?
Relatively simple
You can choose the right speed.
As you can see here, it's 20.
So what if we say
If you're welding material this thin,
I recommend you use the speed of 100
Is to turn it up to 100.
Yes
Can this be entered manually?
Yes
Point determination
OK
You can see that the speed setting has changed to 100
OK
Ms. Hogo Lv
Business Phone:0086-15158107730
Whatsapp:0086-15158107730
Skype: clover_lhg
Email:admin@altrasonic.com
