High quality ultrasonic cake cutter
Application of Ultrasonic Pudding Cake Cutting Equipment
Ultrasonic cake cutting equipment, the output ultrasonic is concentrated on the ultrasonic blade, and the similar blade of the cutting blade is used to concentrate the ultrasonic energy to the cutting part of the material to be cut. Under the action of huge ultrasonic energy, this part instantly softens and melts, and its strength is greatly reduced. At this time, as long as a small cutting force is applied, the purpose of cutting the material can be achieved.
The difference between ultrasonic cake cutting equipment and traditional equipment
Traditional industry: Traditional cutting uses a knife with a sharp edge to press against the material to be cut. This pressure is concentrated on the edge of the cutting edge, and the pressure is very high. If the shear strength of the cake is exceeded, the cake is cut. Since the cake is pulled apart by a strong pressure, the cutting edge of the cutting tool should be very sharp, and the cake itself has to bear relatively large pressure. It is not good for cutting sticky cakes.
Ultrasonic cake cutting equipment: The principle of ultrasonic cake cutting equipment is completely different from traditional cutting. It uses ultrasonic energy to heat and melt a part of the material to be cut, so as to achieve the purpose of cutting the material. Therefore, the ultrasonic cake cutting equipment does not need a sharp edge, and does not require a lot of pressure, and will not cause chipping, breakage, and deformation of the material being cut. At the same time, because the cutting knife is vibrating ultrasonically, the friction resistance is particularly small, and the cut cake is not easy to stick to the blade.
Advantages and prospects of ultrasonic cake cutting equipment
• Cut multi-layer products to keep no color cross-over between layers
• Advantages of ultrasonic cutting: fine cut, no chips, no sticking to the knife
• Can be cut: flake, rectangle, triangle, equal circle
• Wide range of cutting objects
• According to the needs of customers, the cutting models of specific products can be customized
