Copper braided wire ultrasonic welding machine
Copper braided wire is a relatively common type of copper wire in the market, which is used in various industries with electrical conductivity requirements. The way of application is also different. Some are used for grounding wires, and some are used in special industries. However, no matter which industry it is used in, there will be welding requirements, but the requirements are different. Today, the editor introduces to friends, the copper braided wire ultrasonic welding machine.
The copper braided wire ultrasonic welding machine uses the principle of ultrasonic welding, that is, the high-frequency vibration wave is transmitted to the surface of the copper braided wire to be welded. Under pressure, the surfaces of the wire bundles are rubbed against each other to form the fusion between the atomic layers. The advantages are also very obvious.
Advantages of copper braided wire ultrasonic welding machine:
1. The welding material does not melt, and the metal is not fragile;
2. Good conductivity after welding, low or nearly zero resistivity;
3. Low requirements on the surface of the welded metal, both oxidation and electroplating can be welded;
4. The welding time is short, without any flux, gas, or solder;
5. The metal terminal welding machine has no sparks when welding, environmental protection and safety;
6. Easy to realize the connection and automatic control between dissimilar metals;
7. Ultrasonic terminal welding machine has high firmness and no heating defects of brazing.
ultrasonic welding machine welding is a mechanical process, no current flows through the workpiece, so the conductivity of the metal has no effect. Contaminants and oxide layers are usually attached to the metal surface. Ultrasonic welding is used. There is no need to pre-treat the metal surface. Ultrasonic vibration can directly shake the attachment and remove it. Another important advantage of ultrasonic welding is the long life of the workpiece.
