Cake production equipment ultrasonic cutting machine
Cake production equipment Ultrasonic cutting machine is a kind of equipment that uses wave energy for cutting and processing. Its biggest feature is that it does not use cutting edges. In other words, the cutting edge in the traditional sense is not used. Traditional cutting uses a knife with a sharp edge to press against the material to be cut. This pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear strength of the material to be cut, and the molecular bonds of the material are pulled apart and cut. Since the material is pulled apart by strong pressure and rigidity, the cutting edge of the cutting tool should be very sharp, and the material itself has to bear relatively large pressure. The cutting effect is not good for soft and elastic materials, and it is more difficult for sticky materials. The ultrasonic cutting knife directly loads the ultrasonic energy onto the cutting knife, and the cutting knife becomes a cutting knife with ultrasonic waves. When cutting the material, the material is mainly softened and melted by ultrasonic energy, and the cutting edge of the cutter only plays the role of cutting seam positioning, ultrasonic energy output, and separating the material. This cutting method is suitable for cutting thick, thick, and long materials that are inconvenient to set up the cutting board. Ultrasonic cutting has another great advantage, that is, it has fusion in the cutting part while cutting. The cutting part is perfectly sealed to prevent the loosening of the cut material organization. It is suitable for the cutting of assembly lines, professional equipment, and batch materials. Our company can provide various or general-purpose core components of ultrasonic cutting machines according to customer requirements.
2. Advantages of cake production equipment ultrasonic cutting machine:
(1) The cutting precision is high, and the rubber material remains unchanged.
(2) Easy to apply to automated production.
(3) The cutting surface has good smoothness and good bonding performance.
(4) Fast speed, high efficiency and no pollution.
