Nov 06, 2020 Leave a message

Benefits Of Ultrasonic Automotive Wire Harness Welding Machine


Benefits of ultrasonic automotive wire harness welding machine


Ultrasonic automobile wire harness welding uses ultrasonic metal welding technology to weld metal wire harnesses. The high-frequency electric energy is converted into mechanical vibration energy through the transducer to act on the metal wire harness. Physical effects such as diffusion will occur between the copper wires of the wire harness. And the wire harness welding device will apply a certain pressure when the wire harness is joined, and finally the wire harness welding device is removed and the mechanical vibration is stopped, which will form the wire harness welding effect.


During the welding process, there is no current passing through the welded part, and there is no welding arc in the electric welding mode. Since ultrasonic welding does not have problems such as heat conduction and resistivity, it is undoubtedly an ideal for non-ferrous metal material wire beam welding. The wire-beam welding system is generally square-shaped.


Ultrasonic automobile wire harness welding machine uses this principle to weld metal wires. It is composed of power box, transducer, pneumatic host and tool head. In addition, it also includes control components such as hubs, wire measuring devices and microprocessors. The power box can convert the usual external voltage into 20000Hz, 1000V voltage, and then output after being adjusted and controlled by the power box to act on the transducer. The transducer is a highly efficient electrical component that can convert electrical energy into mechanical energy.


Compared with ordinary motors, the transducer has two main differences: First, the transducer converts electrical energy into linear vibration instead of rotation; secondly, it has a very high working efficiency and can convert 95% of the electrical energy. After conversion by the transducer, mechanical energy is applied to the welding head. The ultrasonic welding head is made of titanium alloy and processed into a specific shape according to the principle of acoustics, thus ensuring the maximum transmission of energy.

1. The two objects to be welded are overlapped and joined by ultrasonic vibration and pressure to form a solid state, the joining time is short, and the joining part does not produce cast structure (rough surface) defects;

2. Compared with the method of ultrasonic welding and resistance welding, the mold life is long, the mold repair and replacement time is less, and it is easy to realize automation;

3. Ultrasonic welding can be carried out between the same metal and different metals, which consumes much less energy than electric welding;

4. Compared with other pressure welding, ultrasonic welding requires less pressure, and the deformation amount is less than 10%, while the deformation of the workpiece in cold pressure welding is 40%-90%;

5. Ultrasonic welding does not require pre-treatment of the welded surface and post-weld treatment like other welding;

6. Ultrasonic welding can minimize the temperature effect of the material (the temperature of the welding zone does not exceed 50% of the absolute melting temperature of the welded metal), so as not to change the metal structure, so it is very suitable for welding applications in the electronic field.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry