Application principle of ultrasonic hand cutter
The principle of 40K ultrasonic hand-held cutter is completely different from that of traditional cutting. It uses the energy of ultrasonic to heat and melt the material to be cut, so as to achieve the purpose of cutting materials. Therefore, the ultrasonic cutting does not need a sharp edge, also does not need a lot of pressure, will not cause the material to be cut edge collapse, damage. At the same time, due to the ultrasonic vibration of the cutter, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This is especially effective for cutting viscous and elastic materials, frozen materials, such as food, rubber, etc., or objects that are inconvenient to add pressure.
Ultrasonic cutting also has a great advantage, that is, it has fusion effect in the cutting part at the same time. The edge of the cutting part is sealed to prevent the loose organization of the cut material (such as the flash of textile material).
The use of ultrasonic cutting machine can also be expanded, such as hole digging, shovel digging, paint scraping, carving, slitting and so on
