Advantages of ultrasonic welding machine
1. Advantages of ultrasonic plastic welding:
(1) Fast welding speed, high welding strength and good sealing;
(2) It replaces the traditional welding/bonding process, with low cost, clean and pollution-free, and will not damage the workpiece;
(3) The welding process is stable, and all welding parameters can be tracked and monitored by the software system. Once a fault is found, it is easy to eliminate and maintain.
2. Advantages of ultrasonic metal welding:
(1) The welding material does not melt, and the metal is not fragile.
(2) The conductivity is good after welding, and the resistivity is extremely low or close to zero.
(3) The welding metal surface has low requirements and can be welded with oxidation or electroplating.
(4) The soldering time is short, without any flux, gas, or solder.
(5) Welding without sparks, environmental protection and safety.
Applicable Products
(1) Ni-MH battery Ni-MH battery nickel mesh and nickel sheets melt each other, and the nickel sheets melt each other.
(2) Lithium battery, polymer battery copper foil and nickel plate are mutually melted, and aluminum foil and aluminum plate are mutually melted.
(3) The wires are fused to each other, and they are wound into one or more fused to each other.
(4) The wires and various electronic components, contacts, and connectors melt each other.
(5) The large radiating fins, heat exchange fins and honeycomb cores of various household appliances and automobile products melt each other.
(6) Electromagnetic switches, non-fuse switches and other high-current contacts, dissimilar metal sheets are mutually fused.
(7) The metal pipe is sealed, cut off, waterproof, and airtight.
