Tips for cleaning hardware with ultrasonic cleaning machine
There are various types of hardware and various structures. The main cleaning work is five aspects: wax removal, dust removal, rust removal, oil removal and debris removal. How to efficiently clean hardware in batches? Manual cleaning is time-consuming and labor-intensive, and now the labor cost is high. Therefore, the cleaning of hardware is increasingly done by ultrasonic cleaning machines, especially when the number is large and the structure is complex.
The advantage of the ultrasonic cleaning machine is that its cleaning method is to immerse the hardware in the liquid in the cleaning tank, use the high frequency of ultrasonic waves, convert it into high-frequency kinetic energy through the transducer, and then act on the liquid medium in the cleaning tank to make the liquid generate Cavitation continuously forms numerous fine air bubbles, which burst rapidly, generating impact force to impact the surface of the object, so that the surface dirt can be detached, so as to achieve the effect of cleaning. In this way, as long as the parts that can be touched by water can be cleaned, completely and thoroughly, leaving no dead ends. And it acts on all parts of the hardware at the same time, unlike manual cleaning, so the efficiency is extremely high.
When using ultrasonic cleaning equipment to remove wax and dust from hardware, you can use ordinary water and some washing powder to clean it. If it is degreasing, it is recommended to add some degreasing cleaning agent. When cleaning in large quantities, you can customize the ultrasonic cleaning machine. Install an oil filter so that the water can be recycled without frequent water changes. There are special rust removers for rust removal. For removing debris on hardware, blind holes may not be very effective, because ultrasonic cleaning mainly removes the dirt on the surface, but there is no way to remove it. Shorter vias are no problem at all, removing debris from the holes.
Regarding the frequency of hardware ultrasonic cleaning machine, generally speaking, 40KHz is a general frequency, which can be competent for hardware cleaning work, which has also been confirmed in the actual use of many customers.
