The application and features of different types of ultrasonic cutting machine
Ultrasonic cutting knife, also known as ultrasonic cutting machine, is a kind of ultrasonic equipment specially used for cutting, and it is one of the important categories of ultrasonic applications. The principle of supersonic cutting is completely different from the traditional cutting. Ultrasonic cutting uses the energy of an ultrasonic transducer to heat and melt a part of the material to be cut, so as to achieve the purpose of cutting the material. Therefore, ultrasonic cutting does not require a sharp edge, nor does it require a lot of pressure, and will not cause chipping or damage to the material being cut. At the same time, because the cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This is especially effective for cutting viscous and elastic materials, frozen materials, such as food, rubber, etc., or objects that are inconvenient to apply pressure.
Ultrasonic cutting also has a great advantage, that is, it has fusion at the cutting part while cutting, and the cutting part is perfectly sealed without causing flashing of the textile material. The use of ultrasonic cutting knife can also be expanded, such as digging holes, shoveling, scraping paint, carving and so on.
Application scope of multifunctional hand-held cutting knife
1. Natural fiber, synthetic fiber, various chemical fiber fabrics, etc.
2. Thin plastic products, such as plastic film, mobile phone case
3. Paper, bottom film
4. Rubber, Silicone
5. ABS, PP, PE and other films below 2mm
Features
1. Replaceable blades, increase productivity and save costs
2. Air-cooled device to ensure that the handle does not get hot after turning on continuously
3. Light weight, reduce processing fatigue
4. Only need light touch to complete complex and precise cutting
5. Large output amplitude makes cutting easier
Application scope of rubber cutter
1. Rubber
2. Nylon
3. Sidewall
4. Synthetic fabrics, cloth
5. Plastic etc.
Features
1. The cut is smooth and reliable, the cutting edge is accurate, and it is not deformed, etc.
2. The cutting precision is high, and the rubber material remains unchanged
3. Good cut surface finish and good bonding performance
4. Fast speed, high efficiency, no pollution
5. Low cost, simple operation, no vibration in cutting
