Advantages of Ultrasonic Cutter
Ultrasonic cutting knife uses the energy of ultrasonic to heat and melt the part of the material to be cut to achieve the purpose of cutting the material, so there is no need for a sharp edge. The principle of ultrasonic rubber cutting knife is completely different from that of pressure cutting in the traditional sense.
Ultrasonic cutting knives can be used to cut thermoplastic resin boards, sheets, films and laminates, carbon fiber composites, polyethylene fibers, molded products containing carbon or glass fibers (GFRP), rubber, vulcanized latex, non-vulcanized latex and food Wait.
Traditional cut
common problem:
1. A sharp edge is required, which increases the requirements for the blade.
2. The cutting edge cannot be edge-sealed, and the cutting edge is easy to cause edge collapse and damage.
3. Sticky objects are difficult to cut, and it is easy to stick to the knife, which affects the cutting effect and efficiency.
4. When cutting, it is necessary to apply pressure to the object, which is easy to deform soft or fragile food.
5. Some items will produce a large amount of debris and debris when cutting, which increases waste.
Ultrasonic cutting
1. High stability. When the ultrasonic generator is working, electromagnetic vibration is generated, which is converted into mechanical vibration and transmitted to the cutting knife and the material to be cut.
2. Safety and environmental protection. Ultrasonic knife cutting, the temperature of the knife head is lower than 20 ℃, no smoke and odor will be generated, which eliminates the danger of injury and fire during cutting.
3. Cut neatly. Because the ultrasonic cuts through high-frequency vibration, the material will not stick to the blade surface, only less pressure is required when cutting, and it will not deform and wear for fragile and soft materials, and the fabric will be automatically edge-sealed at the same time. Chipping.
4. Simple operation. The cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains power, and the cutting can be performed by turning on the switch. It supports hand-held and machine-mounted cutting.
5. Scope of application. Rubber, vulcanized latex, non-vulcanized latex, food and various textile materials, plastic sheets can all be cut by ultrasonic cutters.
