Horn Analyzer For Impedance Measurement

Horn Analyzer For  Impedance Measurement

Specification:

Instructions:

Before measurement, first use short wires to short-circuit the positive and negative poles of the transducer to prevent electrostatic breakdown of the tester chip, and then clamp the positive and negative poles of the tester on the transducer, set the start frequency and stop Frequency, for example, the frequency of a 20khz transducer is actually set to 19khz and the stop frequency is set to 22khz. Press the test button to measure, and the measurement will be completed within 1 minute. You can see the spectrogram of all the parameters and the curve. For the transducer, there are double waves, or the quality is not good, which can be judged by the curve.

Features：

1. The impedance measurement accuracy is high, up to 0.001KHz;

2. It is easy to judge defects through admittance circle and logarithmic curve;

3. The test result completely distinguishes the vibrating point and the half power point;

4. The test data computer can be stored and printed unlimitedly and the data source can be traced;

5. Automatic screening and statistics, parameter screening can be set;

6. The automatic operation has high efficiency, simple operation, and avoids manual errors;

Detailed Images:

Hot Tags: horn analyzer for impedance measurement, China, manufacturers, suppliers, factory