Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable

Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable
Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable
Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable
Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable

Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable

Ultrasonic wire harness welding machine uses the principle of ultrasonic metal welding technology to perform pressure welding, row welding and spot welding on copper and aluminum wire harnesses. It is a derivative equipment of ultrasonic metal welding machine. Mainly used in the welding of copper wire and aluminum wire such as the welding of automobile wiring harness and motorcycle wiring harness. It is often called an automobile wire harness welding machine.

Send Inquiry

Product Introduction

Ultrasonic Wire Harness Welder Machine For Welding Electric Wire And Cable

Specification

Power	2000W	3000W	4000W
Welding area	0.5-16m㎡	0.5-20m㎡	0.5-30m㎡
Frequency	20kHz	20kHz	20kHz
Voltage	220V/110V	220V/110V	220V/110V
Generator	Digital	Digital	Digital

Description

Metal welding uses high-frequency vibration waves to be transmitted to two metal surfaces to be welded. Under pressure, the two metal surfaces are rubbed against each other to form a fusion between molecular layers. Its advantages are rapid, energy-saving, and fusion strength. High, good electrical conductivity, no sparks, close to cold processing

Features

There is no need for flux and external heating, no deformation due to heating, no residual stress, and low requirements for pre-welding treatment on the surface of the weldment. Not only the same kind of metal, but also dissimilar metals can also be welded. It is possible to weld thin sheets or filaments to thick plates.

H82a33bff03f24b96b69f12751062307eN