20K Ultrasonic Terminal Welding Machine For Cable And Wire Welding On Terminals
Frequency: 20kHz
Working air pressure: 0.05-0.9Mpa
Power: 3000Watt
Voltage: 220V/110V
Control: Pneumatic
Welding time: 1s
Ultrasonic battery tabs metal spot welder is commonly used for metal welding in the winding and lamination process. It has the characteristics of small size, beautiful appearance, convenient operation, firm structure, stable and safe use and so on.
Working air pressure: 0.05-0.9Mpa
Power: 3000Watt
Voltage: 220V/110V
Control: Pneumatic
Welding time: 1s
Ultrasonic battery tabs metal spot welder is commonly used for metal welding in the winding and lamination process. It has the characteristics of small size, beautiful appearance, convenient operation, firm structure, stable and safe use and so on.
Send Inquiry
Chat Now
Product Introduction
20K Ultrasonic Terminal Welding Machine for Cable and Wire Welding on Terminals
Specification
| Frequency | 20kHz |
| Working air pressure | 0.05-0.9Mpa |
| Power | 3000Watt |
| Voltage | 220V/110V |
| Control | Pneumatic |
| Welding time | 1s |
Advantages
1. The welding material does not need to be melted,does not change the material characteristics,and has no pollution
2. It can realize welding between dissimilar metal,such as nickel+copper,copper+aluminum,nickel+aluminum,etc.
3. The welding time is short,without any flux,shielding gas and filler
Hot Tags: 20k ultrasonic terminal welding machine for cable and wire welding on terminals, China, manufacturers, suppliers, factory
You Might Also Like
Send Inquiry