Ultrasonic Punching Welder for Auto Wheel Arch Welding

Ultrasonic Punching Welding Technology For Auto Wheel Arch Welding
ultrasonic spot welding machine
35khz 800w ultrasonic spot welding machine
ultrasonic spot welding

Ultrasonic Punching Welder for Auto Wheel Arch Welding

Name: Ultrasonic Punching Welder for Auto Wheel Arch Welding
Brand: Altrasonic
SKU: 41844853

Ultrasonic welding is a high-tech technology of sintered plastic products. The use of this technology can replace past production of flux, adhesives, buckles or other mechanical fixation, thereby improving the production efficiency and reduce costs. It is the Auto ultrasonic riveting welding machine. These welders combine technical sophistication with ease of use. They can be easily integrated in your production facilities. The principle of ultrasonic welding is through the ultrasonic generator to convert high-frequency electrical energy into higher frequency mechanical movement, then mechanical movement through a set of amplitude can be changed to the transmission device to the welding head. The welding head transmits the received vibration energy to the joint portion of the workpiece to be welded, in which the vibration energy is converted into heat energy by friction and the plastic is melted. Ultrasonic not only can be used to weld hard thermoplastics, but also can process fabrics and films. ALTRASONIC will find the best solution for your thermoplastic welding needs.

Send Inquiry

Chat Now

Product Introduction

Ultrasonic Punching Welder for Auto Wheel Arch Welding

Description:

Auto ultrasonic riveting welding machine. Ultrasound is not a source of radiation and generally harmless.We all know that when an object vibrates it makes a sound, and the number of vibrations per second is called the frequency of sound, and it's in Hertz. We human ears can hear sound waves of 20 to 20,000 Hertz. When the vibration frequency of sound waves is greater than 20,000 Hertz or less than 20 Hertz, we cannot hear them. Ultrasonic frequencies commonly used in medical diagnosis range from 1 to 5 MHZ. Ultrasonic wave has good direction, strong penetrating ability, easy to obtain concentrated sound energy, long distance in water and other characteristics. It can be used for distance measurement, speed measurement, cleaning, welding, gravel, etc.

点焊参数表.png

FAQ:

Q: How can we do when ultrasonic welding electric current too high?

1. The loose connecting screw between the ultrasonic horn and transducer will lead to the high electric current. The usual way to remove it from a machine that has been in use for some time is to tighten it with a special wrench for ultrasonic die head to see if the die head has not been locked.

2. Ultrasonic mould or horn is damaged broken, it usually appears on the ultrasonic equipment that has been used too long or for a long time, the elimination method is to check whether there is crack in the appearance of the die head, or install it on other ultrasonic systems to check.

3. Replace the ultrasonic transducer vibrator or the ultrasonic horn, if you replaced these two parts lead to high current, such situation is normal, as long as through ultrasonic frequency adjustment can solve this problem.

H82a33bff03f24b96b69f12751062307eN