Ultrasonic Milling Turning Auxiliary Processing System
Output Power: 500 W
Voltage: 220 V/110V
Amplite: 1-10um
Speed: Max 2400rpm
Switch: Handle or foot switch
Power Adjusting: Step or continuous
Working Time Control: 24 Hours
Weignt: 30 KG ( Determined by the size of the horn )
Generator: Digital Generator
Rotary ultrasonic machining is a mechanical type of non-traditional hybrid machining process that can be used to process a variety of difficult-to-process materials, including toughness, hard and brittleness, ceramics, composite materials, etc.
Ultrasonic Milling Turning Auxiliary Processing System
Description:
Ultrasonic milling on the basis of the relative movement of the traditional cutting tool and the workpiece, ultrasonic vibration is applied to the tool or workpiece, and the mechanical and ultrasonic compound action of the tool on the workpiece material is an advanced processing method to obtain better processing performance .
Specification：
Frequency | 20 Khz |
Output Power | 500 W |
Voltage | 220 V/110V |
| Amp | 1-10um |
| Speed | Max 2400rpm |
Switch | Handle or foot switch |
Power Adjusting | Step or continuous |
Working Time Control | 24 Hours |
Weignt | 30 KG ( Determined by the size of the horn ) |
Generator | Digital Generator |
Advantages:
1. The cutting force is low, greatly reducing the cutting force by 30%-90%
2. Extend tool life, 3~5 times longer than ordinary milling
3. The machined surface quality is good, which is one level higher than ordinary milling
Application:
Sapphire
Alumina
Ferrite
PCD
Quartz
Piezoceramics
CVD Silicon Carbide
Ceramic Matrix Composites
Technical Ceramics
Glass TRIANGULAR CAVIT
Hot Tags: ultrasonic milling turning auxiliary processing system, China, manufacturers, suppliers, factory
You Might Also Like
Send Inquiry