Ultrasonic Milling For Hard And Brittle Material

Ultrasonic Drilling And Milling Of Ceramics
Ultrasonic Drilling And Milling Of Ceramics
Ultrasonic Drilling And Milling Of Ceramics
Ultrasonic Drilling And Milling Of Ceramics

Ultrasonic Milling For Hard And Brittle Material

The time spent on ultrasonic machine entirely depends on the frequency of the vibrating tool. It also depends on the size of grains of the abrasive slurry, the rigidity and the viscosity as well. The grains used in the abrasive fluid are usually boron carbide or silicon carbide as they are rigid than others. The used abrasive can be carried away easily if the viscosity of the slurry fluid is less.

Send Inquiry

Product Introduction

Ultrasonic Milling For Hard And Brittle Material

Specification

Frequency	20 Khz
Output Power	1000 W
Voltage	220 V
Switch	Handle or foot switch
Power Adjusting	Step or continuous
Working Time Control	24 Hours
Weignt	30 KG ( Determined by the size of the horn )
Generator	Digital Generator

Processing schematic

Applications

1. Various kinds of materials especially fragile rigid material.

2. Processing plane, groove, all kinds of form surface (such as spline, gear and thread) and special surface of mould.

3. Application area: machining industry, machine tool equipment manufacturing.

4. Application occasion: manufacturing enterprise, universities and colleges, scientific research institution, mechanical equipment transformation industry.

Product details