Ultrasonic Hybrid Machining Process For Hard Brittle Ceramics Composites
Output Power: 500 W
Voltage: 220 V/110V
Amplitude: 1-10um
Speed: Max 2400rpm
Switch: Handle or foot switch
Power Adjusting: Step or continuous
Working Time Control: 24 Hours
Weignt: 30 KG ( Determined by the size of the horn )
Generator: Digital Generator
Ultrasonic milling is the most classic type of ultrasonic machining. The principle of ultrasonic milling: A constant stream of abrasive slurry passes between the tool and workpiece.
Ultrasonic Hybrid Machining Process For Hard Brittle Ceramics Composites
Description:
Ultrasonic milling is the most classic type of ultrasonic machining. The principle of ultrasonic milling: A constant stream of abrasive slurry passes between the tool and workpiece.
Specification：
Frequency | 20 Khz |
Output Power | 500 W |
Voltage | 220 V/110V |
| Amp | 1-10um |
| Speed | Max 2400rpm |
Switch | Handle or foot switch |
Power Adjusting | Step or continuous |
Working Time Control | 24 Hours |
Weignt | 30 KG ( Determined by the size of the horn ) |
Generator | Digital Generator |
Advantages:
1. Products for standardized production, high reliability;
2. Compatible with existing milling machine or machining center interface, can be installed directly;
3. Ultrasonic system amplitude stability, continuous working time is long;
4. The use of ultrasonic digital control generator, all-digital circuit control, anti-interference ability;
Application:
Sapphire
Alumina
Ferrite
PCD
Quartz
Piezoceramics
CVD Silicon Carbide
Ceramic Matrix Composites
Technical Ceramics
Glass TRIANGULAR CAVIT
Hot Tags: ultrasonic hybrid machining process for hard brittle ceramics composites, China, manufacturers, suppliers, factory
You Might Also Like
Send Inquiry