• 0086-15158107730


Hangzhou Altrasonic Technology Co.,Ltd

Add: Room 1101, Building 1#, No 398 Kowloon Avenue, Yinhu Street, Fuchun Silicon Valley, Fuyang, Hangzhou, Zhejiang, China

Tel: +86-571-88638953

Fax: +86-571-88635972

Mobile: +86-15158107730

E-mail: admin@altrasonic.com

The Auto Door Panel Welding Is Used The Ultrasonic Puncture Welding Technology

The Auto Door Panel Welding Is Used The Ultrasonic Puncture Welding Technology

Description: The ultrasonic generator, also called ultrasonic driving power supply, electronic box, control box, is an important part of high power ultrasonic system. Main function is to generate high power and high frequency alternating current, drive the ultrasonic transducer. High-power...

Product Details

The Auto Door Panel Welding is Used the Ultrasonic Puncture Welding Technology

The auto door panel welding machine is also called the auto door panel interior trim panel welding machine. It uses the ultrasonic puncture welding technology to weld the two door panels together. the two door plank interior strength meet customer requirements, The equipment is designed to be symmetrical piece welding machine, it adopts PLC control parameters, semi-automatic production is realized.

The car door panel is spliced together, and several points are fixed by ultrasonic welding technology. There will be a little spillage on the surface of the weld. Plane and plane welding can be used ultrasonic puncture, but there will be scars on the surface,  If the surface is not damaged, ultrasonic welding is generally adopted, and ultrasonic welding line should be designed.



The characteristics of auto door panel interior trim panel multihead ultrasonic welding machine

1. Safety device for starting and emergency stop button, safety grating and honey alarm safety device.

2. The equipment can also weld left and right symmetry of the car door panel trim interior parts.

3. The bottom mold adopts pneumatic pressing device, which makes the document more secure.

4. Adopt PLC controller to control welding time and curing time.

5. Equipped with pneumatic sliding rail device, the product will slide in automatically and then slip out automatically after welding.

6. With 28K welding head, a separate ultrasonic welding gun is set at each solder point, which is controlled by two ultrasonic generator systems.



CE Certification:










Hot Tags: the auto door panel welding is used the ultrasonic puncture welding technology, China, manufacturers, suppliers, factory
Related Products