• 0086-15158107730
+86-571-88638953admin@altrasonic.com

Categories


Hangzhou Altrasonic Technology Co.,Ltd

Add: Room 1101, Building 1#, No 398 Kowloon Avenue, Yinhu Street, Fuchun Silicon Valley, Fuyang, Hangzhou, Zhejiang, China

Tel: +86-571-88638953

Fax: +86-571-88635972

Mobile: +86-15158107730

E-mail: admin@altrasonic.com

40khz Ultrasonic Cutter Titanium Alloy Sonotrode for Rubber

Specification: Description: The principle of ultrasonic rubber cutting knife totally different from the traditional sense of the cutting. By using ultrasonic energy, the material will be cut by locally heating, so as to achieve the purpose of cutting the rubber. Ultrasonic cutting does not...

Product Details

Specification:

Frequency

40Khz

Power

500W- 800W

Input

AC110-240V, 50/60Hz

Power Controller

stepping or continuous

Material Of Cutting Head

aluminum alloy, stainless steel, titanium alloy, alloy steel.

Machine Wight

4 kg-16KG

Accessories

foot switch, additional blade

Cooling Device

compressed air mouth can be installed.

Cable Length

2M or customized

Foot Switch

available


Description:
The principle of ultrasonic rubber cutting knife totally different from the traditional sense of the cutting. By using ultrasonic energy, the material will be cut by locally heating, so as to achieve the purpose of cutting the rubber. Ultrasonic cutting does not require a sharp edge and don’t need a lot of pressure, so it will not cause damage of vulcanization.


The main components of a set of ultrasonic cutting systems include ultrasonic generators (drive power), ultrasonic transducers, horns, cutting knives (tool heads) and the output lines, control lines. Ultrasonic drive power will be converted into high-frequency high-voltage AC current, lost to the ultrasonic transducer. Ultrasonic transducer is actually equivalent to an energy conversion device, it can enter the input energy into mechanical energy, that is, ultrasonic waves. Its manifestation is the transducer in the longitudinal back and forth telescopic movement.


The frequency of the telescopic motion is equivalent to the frequency of the high frequency AC current supplied from the drive power supply. The effect of the horn is to fix the entire ultrasonic vibration system, and the other is to amplify the output amplitude of the transducer. The cutter (tool head) further amplifies the amplitude on one hand, focusing the ultrasound. On the other hand is the output of ultrasonic waves, the use of cutting knife similar to the edge, the ultrasonic energy concentrated input to the cutting material cutting parts.


The site in the huge ultrasonic energy under the effect of instant softening, melting, strength greatly reduced. At this point, as long as the application of a small cutting force, you can achieve the purpose of cutting materials.


Ultrasonic cutting advantage and features:
● Incision smooth, solid, trimming accurate, not deformed, not Alice, fluff, spinning, wrinkles;
● Cutting high precision, rubber unchanged;
● Cutting surface finish is good, good bonding performance;
● Speed, high efficiency, no pollution;
● Beautiful appearance, simple operation, no sense of vibration when cutting, quiet and easy to carry.


Applications:
● Tire crown;
● Nylon
● Steel ribbon plastic layer;
● Nylon cord;
● Lined
● Sidewall
● Apex;
● Triangular circle


Hot Tags: 40khz ultrasonic cutter titanium alloy sonotrode for rubber, China, manufacturers, suppliers, factory
Related Products
Inquiry