• 0086-15158107730
+86-571-88638953admin@altrasonic.com

Categories


Hangzhou Altrasonic Technology Co.,Ltd

Add: Room 1101, Building 1#, No 398 Kowloon Avenue, Yinhu Street, Fuchun Silicon Valley, Fuyang, Hangzhou, Zhejiang, China

Tel: +86-571-88638953

Fax: +86-571-88635972

Mobile: +86-15158107730

E-mail: admin@altrasonic.com

30Khz Portable Ultrasonic Cutting Machine 200W

Description: Ultrasonic cutting system, the main components include ultrasonic generator (drive power), ultrasonic transducer, horn, cutting knife (tool head) and the output lines, control lines. Ultrasonic drive power will be converted into high-frequency high-voltage AC current, lost to the...

Product Details

Description:
Ultrasonic cutting system, the main components include ultrasonic generator (drive power), ultrasonic transducer, horn, cutting knife (tool head) and the output lines, control lines. Ultrasonic drive power will be converted into high-frequency high-voltage AC current, lost to the ultrasonic transducer. Ultrasonic transducer is actually equivalent to an energy conversion device, it can enter the input energy into mechanical energy, that is, ultrasonic waves. Its manifestation is the transducer in the longitudinal back and forth telescopic movement. The frequency of the telescopic motion is equivalent to the frequency of the high frequency AC current supplied from the drive power supply. The effect of the horn is to fix the entire ultrasonic vibration system, and the other is to amplify the output amplitude of the transducer. The cutter (tool head) further amplifies the amplitude on one hand, focusing the ultrasound. On the other hand is the output of ultrasonic waves, the use of cutting knife similar to the edge, the ultrasonic energy concentrated input to the cutting material cutting parts. The site in the huge ultrasonic energy under the effect of instant softening, melting, strength greatly reduced. At this point, as long as the application of a small cutting force, you can achieve the purpose of cutting materials.


Specification:

Model

HSPC30

Frequency

30KHZ

Output Power

200W

Generator

Digital generator, 452 x 180 x 100mm

Handle

Φ44×220

Size of cutter

Blade replaceable

Length of cable

3M

Outer skin

Aluminum

Weight

8KG

Voltage

220V / 110V

Accessory

Foot switch 1pc; Cut blade 2pcs; 
1.5mm special hex wrench 1pc; Screw M3×4L 2pcs

Material of blade

titanium alloy, stainless steel


30K ultrasonic multi-function handheld cutter applies to:
● Natural fibers
● Synthetic fiber
● Thin plastic products(Such as plastic film, cell phone case)
● All types of paper, bottom film
● Rubber, silicone
● Repair of printed circuit board copper foil
● ABS、PP、PE … other organic plastic sheet less than 2mm
● Various types of synthetic fabrics


The device features:
1. No need the sharp knife and large push, no damage of plastic
2. Small frictional resistance, no cutting material stick to the blade
3. Fast cutting speed, save labor cost
4. Safe operating, lower energy consumption, no noise
5. Easy operating,easy installation


The following table presents the company tests for different material thickness, the recommended cutting speed data.

Cutting Material

Thickness

Cutting speed

ABS/PE

2mm

4mm/s

3mm

2mm/s

4mm

1mm/s

PVC

2mm

15mm/s

Asian gram force

2mm

3mm/s

Non-woven fabric

3mm

2mm/s

Chloroprene rubber

5mm

Easy to cut

Corrugated paper

8mm

Easy to cut

Plywood

2.5mm

Easy to cut

Glass fiber resin

1.5mm

Easy to cut

Thick cardboard

1.5mm

Easy to cut

Linen

2mm

Easy to cut

Urethane

3mm

Easy to cut

Nylon/PP

3mm

Easy to cut


Hot Tags: 30khz portable ultrasonic cutting machine 200W, China, manufacturers, suppliers, factory
Related Products
Inquiry